T-350 Trench Burner The T-350 trench burner is our traditional industrial trench burner that has been on the market for many years, formerly as T-359 and a couple of decades and more ago as F-045. We currently manufacture three models in the trench burner T-Series. These units are differentiated by their manifold lengths. The T-400 has a 40 foot manifold, the T-350 has a 35 foot and the T-300 a 30 foot manifold, respectively. The CAD drawings below are representative of the T-350.  Specifications and Pit Dimensions are shown at the bottom of this page. T-350 Trench Burner T-SERIES SYSTEM COMPARISON Model Overall Size L × W × H Trench Size L × W × D Weight* lbs. Fuel Consumption** gal/hr Average Thru-put*** tons/hr T-300 28'10" × 8'2" × 6'10" 30' × 10' × 12' 6,500 lbs Tongue: 750 2.5 6-8 T-400 28'10" × 8'2" × 6'10" 40' × 10' × 12' 6,900 lbs Tongue: 1,200 lbs 3.5 8-10 T-350 18'9" × 8'2" × 8.7" 35' × 10' × 12' 7,000 lbs Tongue: 1,200 3.5 12+ The T-400 is our standard model. The T-200, T-300 and the traditional T-350 are special order items as Custom Equipment.   Table with Metric Conversions *) Hitch Select appropriate Class Hitch for Towing **) Diesel Engine: T-400: Kubota V3600-TE (Tier3) or equivalent engine. T-350: Kubota V3800-TE (Tier3) or equivalent engine. Diesel fuel consumption rated at average operating RPM. Drive System: PTO & multi-belt drive. **) Notes on Through-put: Through-put depends on many factors, such as nature and type of wood waste, its moisture content, prescribed opacity limits, operator skills, elevation of location, etc.  The figures stated here are guidelines only.  If more specific information is required, please, contact the Factory. Options: Hydraulic surge brakes in lieu of electric brakes; spare wheel/tire mounted under cowling. NOTE: 1) All weights and dimensions are approximate.  Metric conversions rounded. 2) Dimensional drawings can be provided on request. 3) Subject to change without notice.  Rev.02.2012 T-350 SPECIFICATIONS 1 Power Kubota V3800-TE (99 HP) or equivalent Diesel engine.  Full enclosure with muffler and locked control panel. Emission certified CARB; EPA Tier3 (2011); Engine mounted PTO (Power take off) coupled to a heavy duty 3 belt drive system 2 Safety Systems Engine over temperature shut down; Loss of cooling fluid shutdown; Loss of oil pressure shutdown 3 Instrument Panel Start/Stop key switch, tachometer, hour meter, oil pressure and water temperature indicators with safety shutdown feature and adjustable locking throttle; lockable instrument panel 4 Air Supply Custom heavy duty industrial air fan 5 Carrier Pipe The Carrier Pipe protects the trailer from fire damage by providing a “set-back” between the trailer and the burn trench; the carrier pipe is ~36’ long carrier pipe (~11 m) and includes a flexible section for easy terrain adjustment and for building a trench in a berm; the manifold is made of steel tubing, 14" (35.6 cm) in diameter, ¼" (6.4 mm) thick for durability 6 Manifold Dimensions Manifold Length: 35' (10.7 m) 7 Average Trough-put 12 Tons per Hour 8 Fuel Consumption Approx. 3.0 Gal/Hr. (11.4 L/Hr.) 9 Weight 7,000 lbs. (3,175 kg); Tongue Weight: 1,200 lbs (544 kg) 10 Miscellaneous 50 gallon (189 liters) minimum fuel tank capacity 11 Transportation The unit is built around a custom dual axle trailer with electric brakes and trailer lighting.  Racks for loading the manifolds and carrier pipes during transport provided. Also included is a built-in locking tool box for miscellaneous items. 12 Options Spare wheel with tire 13 Dimensions Length Width Height 18' 9" 8' 2" 8' 7" 5.70m 2.50m 2.60m Note: All weights and dimensions are approximate and metric conversions are rounded. Subject to change without notice. T-350 TRENCH CONFIGURATION   Printable T-350 Spec Sheet Previous Page Top of Page