|
|
|
|
|
T-200
TRENCH BURNER
| |
|
|

|
|
T-200 Trench Burner
|
The T-200 trench burner is our
smallest trench burner.
We currently manufacture
two models in the trench burner T-Series. These units are differentiated by their manifold
lengths.
The T-400
has a 40 foot manifold and
the T-200 a 20 foot manifold, respectively.
|

|
|
T-200, Manifold
Extended |
|
(Retracts from rear of
machine and is folded out to both sides; for storage, the manifold
wings are folded against the carrier pipe and pushed back into the
trailer)
|
BOTH THE T-200 AND
T-400 FEATURE THE ALL IMPORTANT SAFETY SET-BACK OF 20 FEET.
THIS IS THE DISTANCE BETWEEN THE BURN-PIT AND THE TRAILER
UNIT. IT ASSURES THAT THE HIGH TEMPERATURES IN THE
BURN PIT WILL NOT DAMAGE OR DESTROY THE TRAILER. A
SPECIAL RETRACTABLE 20-FOOT "CARRIER PIPE" CONNECTS THE
MANIFOLD WITH THE BLOWER UNIT. |
|
|
The T-200 and T-400 are new models that were introduced in Summer 2002. |
|

|
|
T-200
Trench Burner |
|
|

|
|
|
T-SERIES SYSTEM COMPARISON |
|
|
Model
|
Overall Size
L × W × H
|
Trench Size
L × W × D |
Weight*
lbs. |
Fuel
Consumption**
gal/hr |
Average
Thru-put***
tons/hr |
|
T-400 |
28' × 8' 1" × 6' 10" |
40' × 10' × 12' |
6,900 |
3.5 |
5 - 8 |
|
Tongue: 1,200 |
|
T-200 |
28' × 8' 1" × 6' 10" |
20' × 10' × 10' |
5,100 lbs. |
2.5 |
1 - 4 |
|
Tongue: 890 |
|
|
Air Burners
traditional T-350 trench burner has been
discontinued as a standard model in 2004. It
continues to be available as
Custom Equipment. |
| |
Table with Metric
Conversions |
|
*)
Hitch |
Select appropriate Class Hitch for Towing |
|
**) Diesel Engine: |
T-400, Kubota V3300-TE (Tier2).
T-200: Kubota V2003-TE (Tier2), or equivalent engines.
Diesel fuel consumption rated at average operating RPM.
Drive System: PTO & multi-belt drive. |
|
**) Notes on Through-put: |
Through-put depends on many factors,
such as nature and type of wood waste, its moisture content,
prescribed opacity limits, operator skills, elevation of
location, etc. The figures stated here are guidelines
only.
If more specific information is required, please,
contact the Factory. |
| Options: |
Hydraulic surge brakes in lieu of electric brakes; spare
wheel/tire mounted under cowling. |
|
NOTE:
1) All weights and dimensions are approximate.
Metric conversions rounded.
2) Dimensional drawings can be provided on request.
3) Subject to change without notice. |
|
Rev.06-2007 |
|
|
|
|
|
T-200 SPECIFICATIONS
|
1 |
Power |
Four cylinder Diesel
Engine 59 HP (Kubota V2003-TE or equivalent engine), full enclosure;
security locks around power source; Emission
certified US EPA Tier 2 & EC Stage 2 |
|
2 |
Drive Train |
Engine mounted PTO
(Power take-off) with multi-belt drive |
|
3 |
Electrical
System |
12 Volt DC; Engine mounted alternator;
Heavy duty battery; complete trailer lighting |
|
4 |
Instrument
Panel |
Key switch, tachometer,
hour meter, fuel gauge, oil pressure and water temperature
indicators with safety shutdown feature and adjustable locking
throttle; lockable instrument panel |
|
5 |
Safety
Systems |
Low oil pressure
shutdown; Over temperature shut down; Loss of cooling fluid
shutdown |
|
6 |
Fan |
Custom
fan |
|
7 |
Carrier
Pipe |
The Carrier Pipe protects
the trailer from fire damage by providing a “set-back” between the
trailer and the burn trench;
20’ long carrier pipe, fully assembled, easily extends and
retracts from trailer |
|
8 |
Manifold
Design |
Welded
steel, fully assembled, hinged to carrier pipe |
|
9 |
Manifold
Dimensions |
Manifold Length: 20' (6
m) |
|
10 |
Manifold Set-back |
Safety set-back or length
of carrier pipe between blower unit and manifold at pit: 20'
(≈6 m) |
|
11 |
Average Through-put |
1-4 Tons per
Hour |
|
12 |
Fuel Consumption |
Approx. 2.5 Gal/Hr. (9.5
L/Hr.) |
|
13 |
Weight |
4,900 lbs. (2,222
kg) Tongue Weight: 890 lbs (403 kg) |
|
14 |
Miscellaneous |
24 gallon (91 liters)
minimum fuel tank capacity winch to |
|
15 |
Air Quality |
Meets or exceeds
applicable US-EPA Regulations |
|
16 |
Transportation |
Fully welded steel
trailer, dual axles with electric brakes on one axle; Full trailer lighting;
Hitch: Both Pintle and
2-5/16 inch ball |
|
17 |
Dimensions |
|
Length Width Height |
28'
10" 8' 1" 6' 10" |
8.80
m 2.46 m 2.10 m |
|
|
Note: All weights and dimensions
are approximate and metric conversions are
rounded. Subject to change without
notice. |
T-200 TRENCH
CONFIGURATION

v.0805a
|
Printer
Friendly T-200 Specification Sheet (2 Pages, PDF)
Previous Page
Top of Page |
|
|
|

|
|
|
|
Note on
Printing Information from This Web Site:
The pages of this
site have not been designed for printing.
Please, go to our
DOWNLOAD
or
PHOTO GALLERY
section or click on
"Printer Friendly Version" where available for
printing. |
|

For further information,
direct factory sales, price quotations
and delivery information,
please, contact:
|
|
|
AIR BURNERS, LLC
Marketing &
Sales Department
4390 Cargo Way
Palm City, Florida 34990
Regular Factory Sales Office Hours:
Monday through Thursday 7:30 am - 5:30 pm
For urgent matters after hours:
Call 561-248-9011
Norbert Fuhrmann, Sales Director
Tel:
772-220-7303
Tel: 888-566-3900
(Toll-free, US only)
Fax: 772-220-7302
E-Mail nfuhrmann@airburners.com |

|
AIR BURNERS, LLC
Main Factory
4390 Cargo Way
Palm City, Florida 34990
Tel: 772-220-7303
Fax: 772-220-7302
Palm City is
located 30 miles
North of West Palm Beach
on Florida's Atlantic Coast West of Stuart
Get driving directions and map (printer friendly) and
airport locations
More Driving
Directions
from Mapquest:
 |
|
|
|
THANK YOU
FOR YOUR VISIT !
|
Copyright 1996-2008, Air Burners, LLC
All Rights Reserved.
The Words "Air Burners",
"airburners" and the
Air Burners Logos are
Registered Trademarks of Air Burners, LLC.
Last Updated on
May 08, 2008 by Air Burners, LLC.
Contact
webmaster for any issues regarding this
Web Site
|
|
|
|