Home Page

orline.GIF (108 bytes)

 

GSA Contract Info

 

Go to Top of Page

 

 

 

S-111
(S-100 Series)


S-111

S-111
Refractory Walled Air Curtain Burner
(Shipped Completely Assembled; Unit can be shipped in standard 40 ft. hi-cube shipping container)

Dimensions & Weight

S-Series Comparison Chartrevious Page

 

S-111
SPECIFICATIONS


General:

A self contained, completely assembled above ground Air Curtain Incinerator (air curtain burner) with a refractory lined firebox for permanent (stationary) installations or for applications requiring a portable unit. Designed for the high temperature burning of yard trash, forest slash, land clearing debris and untreated wood waste with performance exceeding the requirements of US EPA 40CFR60.

Shipped from the factory completely assembled ready for immediate use and does not require disassembly for relocation. These fireboxes are also used for disaster recovery and Homeland Security contingencies and for certain MSW disposal applications.  Electrically powered version available for permanent (stationary) installations.

1

Power Source

Four cylinder Diesel Engine 59 HP (Kubota V2003-TE or equivalent engine), full enclosure; security locks around power source; Emission certified US EPA Tier 2 & EC Stage 2

2

Drive Train

Engine mounted PTO (Power-take-off) with direct coupling drive to fan; Manual engage / disengage lever

3

Burn Container
(Firebox)

4" (102 mm) thick walls; Refractory panels filled with proprietary thermal ceramic material cast into steel trays; panels kiln cured before assembly with proprietary stress relieving and crack propagation reduction features; 2 full height rear doors with 2 hinges each and safety latch feature; 1 ignition hole with safety hatch

4

Safety Systems

Low oil pressure shutdown; Over temperature shut down; Loss of cooling fluid shutdown. 

5

Electrical System

12 V DC with engine mounted alternator

6

Instrument Panel

Key switch, tachometer, hour meter, fuel gauge, oil pressure and water temperature indicators with safety shutdown feature and adjustable locking throttle; lockable instrument panel

7

Fan

Custom fan

8

Manifold

Welded 10 gauge steel assembly

9

Skid Deck / Equipment Deck

˝" (12.7 mm) steel plate, all solid-weld construction equipment deck with protective brush and ember guard; proprietary “cool wall” ventilated firewall for operator and equipment protection; diamond plate anti-slip top surface. Full engine enclosure to protect against debris build-up which may become a fire hazard and to provide operator safety from rotating parts. Fully enclosed bottom surface to minimize ground pressure

10

Miscellaneous

65 gallon (265 liters) minimum fuel tank capacity

11

Air Quality

Meets or exceeds applicable US-EPA regulations

12

Transportation
& Set-up

Shipped completely assembled - No on-site set-up; Ready for immediate use; Transportable by "tilt-bed trailer", "sliding-axle trailer", standard flatbed or other such trailer systems; Unit is skid mounted and it has no floor; 2 doors in back; Lifting pads provided for crane lifting

13

Options

Ember screen; For permanent installations: Electric motor; Heat recovery

14

Average Through-put

0.5-2 Tons per Hour

15

Fuel Consumption

Approx. 2.5 Gal/Hr. (9.5 L/Hr.)

16

Weight

20,500 lbs (9,300kg)

   17

Dimensions

Overall Size
L × W × H

Fire Box
L × W × H

18'11"  × 7' 5" × 7' 8"
(5.76m × 2.2m × 2.3m)

11' × 5' × 6'
(3.35m × 1.5m × 1.8m)

Note: All weights and dimensions are approximate and metric conversions are rounded.
Subject to change without notice.

 Rev. 12907b

 

Printer Friendly S-111 Specification Sheet (1 Page, PDF)
Previous Page
Top of Page

 

orline.GIF (108 bytes)

Note on Printing Information from This Web Site:
The pages of this site have not been designed for printing.  Please, go to our
DOWNLOAD or PHOTO GALLERY section or click on "Printer Friendly Version" where available for printing.


Lease-Financing
For further information, direct factory sales, price quotations
and delivery information, please, contact:

AIR BURNERS, LLC
Marketing & Sales Department
4390 Cargo Way
Palm City, Florida 34990

Regular Factory Sales Office Hours:
Monday through Thursday  7:30 am - 5:30 pm

For urgent matters after hours:
Call 561-248-9011


Norbert Fuhrmann, Sales Director
Tel:
 772-220-7303
Tel:  888-566-3900 (Toll-free, US only)
Fax: 772-220-7302

E-Mail  nfuhrmann@airburners.com

orlineV.GIF (908 bytes)

AIR BURNERS, LLC
Main Factory
4390 Cargo Way
Palm City, Florida 34990

Tel: 772-220-7303
Fax: 772-220-7302

Palm City is located 30 miles
North of West Palm Beach
on Florida's Atlantic Coast West of Stuart

Get driving directions and map (printer friendly) and airport locations
 

Driving Directions

More Driving Directions
from Mapquest:

General E-Mail
info@airburners.com

Search This Site
(Site Search Includes PDF Files)
Top of This Page
Back to Previous Page

THANK YOU FOR YOUR VISIT !


Copyright 1996-2008, Air Burners, LLC
All Rights Reserved.

The Words "Air Burners", "airburners" and the Air Burners Logos are
 Registered Trademarks of Air Burners, LLC.


Last Updated on May 08, 2008 by Air Burners, LLC.
Contact webmaster for any issues regarding this Web Site